Vỏ PSU đôi cho Riden Dual RD6006/RD6012/RD6018

Two RD60xx PSU in one case using a single 1000W power supply as power source (800 & 1200W are also available, see link below).

Support my work

For non-Prusa parts and filaments, check out 3DJake (International, UK, Germany, France).
I'll get a small cut of any order you fulfil using these links (at no additional cost for you 😉).

If you want to support my work directly, you can buy me a coffee.

If you want to order a Prusa printer and earn some Prusameters (I will also get some), you can use my referral code "@whity" at checkout or click one of the following links
(the code only works for the first order of each printer model):
| MK4 | MK4 Kit | MINI+ | MINI+ Kit | XL | SL1S | SL1S+CW1S |

Also check out my other models.

Printing

Printing all the parts took almost 80h in total.

Two versions of the STLs (Case & back) are available:

• Single piece if you're able to print ~375mm
• Splitted parts if you have a smaller print bed (>200mm)

For the splitted main case I also added the 3mf files where i added some tabs to better hold down the part to prevent specially the corners from warping. Also i adjusted the layer hight in the middle part to shorten the print time.

Additional parts you need:

• 1 x Power Supply (1000W) ***
• 1 x rocker switch (for 21 * 15 mm hole)
• 1 x C14 panel mount plug with integrated fuse (for 31.1 * 27.3 mm hole, screw distance 36 mm)
• 4 x Rubber feets (which have a hole for M3 screws, max 22mm in diameter)

Screws & nuts:

• 8 x M3 square nut
• 10 x M3 nut
• 4 x M4 nut
• 8 x M3 * 10 mm flat head screw
• 8 x M3 * 16 mm flat head screw
• 4 x M4 * 10 mm pan or button screw (PSU)

*** The power supply is (very) loud. I modified it to regulate the fan down to a normal (quiet) speed using a simple adjustable step-down converter. As i normally don't use high power over long time, this works fine for me. Only modify a PSU if you really know what you're doing!