
Đồ Gia Dụng
Giá đỡ dock Thunderbolt Dell WD19 cho kênh cáp IKEA Signum
- Downloads
- 35
- Likes
- 6
- Views
- 930
- Remixes
- 0
- Comments
- 0
Files 2 627.8 KB
- wd19s-mount-dock_1765771140.stepSTEP · 355.4 KB
- wd19s-clip-cable-channel_1765771141.stepSTEP · 272.4 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #34477
- Category
- Đồ Gia Dụng
- Published
- License
- Creative Commons — Attribution
Description
Assembly that screws into the Thunderbolt dock and can be clipped into a Signum cable channel.
Allows for easy installation and removal + simple cable routing directly into the cable channel above.
The part can be mounted in any orientation on the dock, allowing for it to be aligned with the cable channel or be mounted orthogonally to it.
Printing
Print both parts on the chamfered sides. The dock part as-is and the cable channel clip on its side.
Printing required no supports.
Required hardware
- 2*M2.5x8 cap head screws (for the dock)
M2.5x10 will very likely work as well (see the description of my other model) - 4*M3x10 screws (any head shape) for connecting the two parts
- 4*M3 square nut (e.g. DIN562) for connecting the two parts
You might be able to use hex nuts as well; however, for M3 I recommend square nuts in general
Print spec
- Formats
- step
- Model files
- 2
- Total size
- 627.8 KB
- Largest file
- 355.4 KB
0 comments
You may also like 12 models
See all-

-

-
New -

-

-

-

-

-

-

-
New -


