Tấm upper rear panel có logo Voron cho Voron 0

I wanted to have the upper rear panel printed and with a two color Voron logo on the back.

The panel is 3mm thick. Keep in mind that you might want to change the thickness based on how thick your acrylic panels are.

To print with color you need the following settings in the slicer:

• Print with basecolor the layers from 0mm - 1mm (inlcuding the 1mm layer)
• Print with the accent color from 1.2mm to 2.2mm (including the 2.2mm layer)
• Print the last four layers from 2.2mm to 3mm in the base color again