Hộp Đựng Đầu Phun Gridfinity (Ankermake, Volcano, Mk6, Mk8)

I wanted a compact way to store spare nozzles, but nothing I found matched all my criteria:

• Gridfinity compatible and stackable
• Compact with maximum storage capacity
• Designed for Ankermake nozzles

This bin will store 16 Ankermake nozzles in a stackable 1x1x4U bin. Since volcano nozzles are pretty close in size, I made the design compatible with them as well. There is also a version with no stacking lip if you don't care about that, which saves a bit of height and plastic. And since I had a working parametric design, I figured I would generate versions for Mk6 and Mk8 nozzles as well (which are slightly non-standard at 2.5U high). Please note that I don't have any Mk6, Mk8 or volcano nozzles at hand, so if you print this bin for use with any of them, I would very much appreciate some feedback to confirm that they work as designed.

To achieve this level of compactness, some sacrifices were made: there are no size labels, and you will most likely need to use rubber-tipped tweezers to take the nozzles in and out.

Updated 2023-10-14: Fixed all models to get rid of potential issues with slicing (thanks to Obelisk89).