Skip to main content
F3D
Khay xách 6 lon sơn xịt (6-Pack) – Không cần Supports 1

2 images

DIY

Khay xách 6 lon sơn xịt (6-Pack) – Không cần Supports

By BrianBu_1333886

Downloads
1,137
Likes
467
Views
4,668

Files 8 155.9 MB

  • Spray_Paint_Can_6_Pack_Holder_With_Cans_v1.1_1777226506.3mf3MF · 4.2 MB
  • Spray_Paint_Can_6_Pack_Holder_v1.1_1777226507.3mf3MF · 1.8 MB
  • Spray_Paint_Can_6_Pack_Holder_v1.1_1777226509.stlSTL · 5.3 MB
  • Spray_Paint_Can_6_Pack_Holder_v1.0_1777226510.3mf3MF · 1.9 MB

Make a variant with AI

Build another version of this model.

Open Studio

Details

Model ID
#342340
Category
DIY
Published

Description

⭐ UPDATE March 2026: I have decided to change the license to Attribution only, which now allows for Commercial use.

Additionally many people have printed this with no supports without an issue.  It's your call if you think your printer can handle it or not.

◼ ABOUT

My art of choice is street art or graffiti. I paint exclusively with spray.

This is an elegant design for a simple job. Hold your colors while you head to your spot.

I tried to eliminate the need for supports as much as possible. My first couple prints, I sliced this with just the joints and handle being supported.  My third print and any future prints will be handle only support, which is only possible in Prusa Slicer.  See ⬇below⬇ for more details.

Although this was designed with aerosol cans in mind.  It can hold other cylindrical items. Energy Drink cans fit, and glass bottles!  🍺 Cheers! 

◼ PRINTING

You will need a printer that can print models that are 160 x 240, and a height of 250.

📝 Note:  If your Z Max is 250, don't forget to drop your Z Axis after the print before turning off your machine.  Some printers will not allow you to move Z down without homing, and home moves Z up to perform. This will cause a crash at Z max which may result in the need to re-execute bed leveling.

◼ MATERIAL

I recommend using PLA+ to print this. PLA+ has limited warping during print, and also provides impact resistance not found in PLA or PETG. Due to the thin nature of this design impact resistance will be a bigger factor than strength.

Prusa Store has PLA+ in 4 skin colors as on 11/2023: https://www.prusa3d.com/product/filament-pm-pla-skin-477c-1kg/  If you would like to explore more colors, I would recommend Overture's PLA+ named PLA Professional https://amzn.to/3sqCkMv and Super PLA+ https://amzn.to/40tsWUP. 

◼ Slicing

Using a smaller layer height such as 0.15 or 0.2 will drastically improve your print.  This is due to each layer having an overhang.  The smaller your layers are the less supports you will need.

🔹Prusa Slicer 🥇

Slicing this in Prusa Slicer is my recommendation.  Prusa Slicer has a feature not in Cura Slicer, which is paint on support.  In Prusa Slicer paint a small support line under the handle. Select Organic supports and deselect automatic supports.  This will give you the single support as show.

🔹Cura Slicer

Cura Slicer does better at putting the supports automatically, but cannot support the handle only.  Setting the overhead angle to 60% should get you to supporting only the joints.  Cura doesn't have the ability to be selective about where to place your supports, so I do recommend Prusa Slicer.  This will still work, but just take longer to print and waste more material.

◼ Testing

Just a visual record of the the improvements and changes as I print out the first few.

🔹Last Test Print  🏆

Version:  1.1

Notes:  Testing printing with just the handle support.  Well my retraction settings are off in Prusa Slicer, but unbelievable print with the limited supports. 

I am absolutely flabbergasted that this came out soo good with just the single support.  Although I knew the math supported the lack of supports 😏.  I needed the visual support to support my theory 😏😏.

And for those who are wondering, yeah I threw this one at the ground also.  The PLA+ held up; no breaks.

My nozzle is rigged on right now, so I don't expect the best layer lines.  

Print Settings:  PLA+ - 0.6 Nozzle - 2 parameters - 20% Infill - Layer Height 0.15mm

Supports:  Just Handle

Links:

Banana Candy Yellow PLA+: https://amzn.to/3sqCkMv

Montana Cap Assortment: https://amzn.to/468Do5o 

Montana Black (High Pressure): https://amzn.to/49odRrV 

Montana Metallic: https://amzn.to/3sv7mCP

Montana Gold (Low Pressure): https://amzn.to/3FLqvUl 

🔹Second Print 💪

Version:  1.0

Notes:  Handle is strong and had no issues.  I just used all the extra PLA filament for this print test print.

Print Settings:  PLA - 0.8 Nozzle - 1 wall - Alternate Extra Wall - Connected Infill - 20% Infill - Layer Height 0.2mm

Supports:  All Joints

Links:

Ghost Energy Drinks: https://amzn.to/47nkjxn

Montana White Out: https://amzn.to/4716dSt (Best Opaque White Spray)

🔹First Test Print 💀

Version:  0.9 (Removed)

Notes:  The handle broke off during removal from the bed.  I updated the design to reinforce that area significantly.

After gluing the handle back on, I was satisfied with the overall strength.  After throwing it at the ground a few times 🪦, I recommend using PLA+.  It did hold up surprisingly well with just the Silk PLA, but PLA+ would do a much better job.

Print Settings:  PLA - 0.8 Nozzle - 1 wall - Alternate Extra Wall - Connected Infill - 15% Infill - Layer Height 0.3mm

Supports:  All Joints

Links:

Silk PLA Red/Orange (not recommend for this model): https://amzn.to/3u738lz 

Montana Metallic: https://amzn.to/3sv7mCP

Montana Gold (Low Pressure):- https://amzn.to/3FLqvUl 

◼ Helper Models Used

Can Design: https://www.printables.com/model/217596-spray-paint-can-model 

📝 Can model was used as a baseline for dimensions.  The model was adapted to provide a more realistic render, but is not apart of the core aspects of this design.

Cap Design: https://cults3d.com/en/3d-model/gadget/spray-cap

📝 Cap model was used as a baseline for dimensions.  The model was adapted to provide a more realistic render, but is not apart of the core aspects of this design.

Read more Show less

Print spec

Formats
3mfgcodestepstl
Model files
8
Total size
155.9 MB
Largest file
69.7 MB

0 comments

See all