
Máy In 3D
Giá đỡ ADXL345 trục X cho Elegoo Neptune 4 Pro
- Downloads
- 422
- Likes
- 64
- Views
- 3,748
- Remixes
- 0
- Comments
- 0
Files 1 97.7 KB
- Neptune_4_Pro_ADXL345_X_Axis_Mount_1777216846.stlSTL · 97.7 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #341906
- Category
- Máy In 3D
- Published
Description
An X axis mount for the ADXL345 inspired by @FLYNINDUSTRIES's bed clamp mount.
This mount was designed for the Neptune 4 Pro but may work on other models leveraging the metal guide rails.
Please note that someone has explicitly tried this on the regular Neptune 4 and would not fit due to that printer using POM V-guide rails, resulting in the print head sitting lower on the x gantry.
This leverages heat set inserts to ensure the ADXL345 stays secured. Simply remove the cable fastener on the print head and attach this mount.
Bill of Materials:
- 2x - Heat Set Inserts (M3x5x4)
- 2x - M3 4mm cap head bolts for mounting the ADXL345
- 2x - Original M3x16 screws used for the cable fastener
Print Settings:
- 4 Perimeters/walls
- 15% infill
- 0.2mm layer height
- 0.4mm line width
- 5 top and bottom layers
- Parts are pre oriented in the correct position for printing
- No supports needed
Print spec
- Formats
- stl
- Model files
- 1
- Total size
- 97.7 KB
- Largest file
- 97.7 KB
0 comments
You may also like 12 models
See all-

-
New -
New -
New -

-
New -

-

-

-

-

-


