DARK RITUAL – Nơi Hành Lễ Cho Necromancer

Use my link to try NUMAKERS filaments>>>
 

https://numakers.com/?ref=EnderProPrints

use my coupon code for 5% off>>TATENIMRICK

• Recommended for Resin Printers and FDM Printers

3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)

• Line Width/ Nozzle: 0.4 mm
• First Layer Line Width: 0.48 mm / 120%
• Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) | 20 mm/s (First Layer) / 500 mm/s (All the other layers on Bambu Lab)
• Recommended Initial Layer Height:  0.28 mm
• Recommended Layer Height:  0.28 mm
• Recommended Perimeters/ Walls: 3.
• Recommended Infill (%): 5% (Gyroid)
• Needs Support: Yes (Bone Door/Elephant Skull/Top Skull 01/Top Skull 02/ Top Skull 03/ Top Skull04). (use organic/tree supports)
• Build Plate Adhesion: Skirt.
• All other settings must follow your (3D Printer) recommendations
   

Pre-Supported: Standard STL file version includes all supports (pre-supported).

Solid Model: You must hollow the 3D print model yourself and add the supports as you wish.

Hollow Model: You must add your own supports.

Wanna build this bad boy just like us? You’ll need: 

8 – Smaller Wall
12 – Corner
9 - Top Corner 01
9 - Top Corner 02
5 - Channel Floor Final
5 - Channel Floor
2 - Central Channel Floor
34 - Basic Floor
4 - Elephant Skull
2 - Stairs For Second Floor
4 - Second Stairs First Floor
4 - First Stairs First Floor
12 - Wall 01
10 - Wall 04
6 -Wall 03
8 - Wall 02
02 - Entry
150 - OpenLock Clip
1 - Top Skull 01
1 - Top Skul 02
1 - Top Skull 03

1 - Top Skull 04