Dice Tower !!! Vase Mode !!! (Tháp xúc xắc in Vase Mode)

Here a crazy dice tower which is designed to be printed in vase mode.

Use a layer height of 0,12mm and at least 0,6mm line width with a 0,4mm nozzle.

It is possible to print a bigger line width with a small nozzle, just increase the temperature a bit that the more material can be melted.

Take care in your print preview, that the faces are closed. You can see it best in the top view.

For the bottom i recommend 4-6 complete filled layers.

With 0,8mm line width, the dice tower will need around 185g filament.

Would be happy to see your makes!