ImbaBrix (Gạch khối lắp ghép cỡ đại)

These are giant bricks. I dont think I have to explain more!

For reference the regular 4-pin brick is 160*160*100 mm.

My "max" speed" to settings:

• Layer height: 0.28 mm
• Infill: 7% Grid or 5% gyroid
• Perimeters: 2
• Top layer: 4
• Bottom Layer: 2

For the “cover” stones I recommend at least 12% infill, 3 perimeters and 0,2mm layer height! Otherwise they will “crunch” alot. ;)

Dont mix materials (e.g. some stone ABS some PLA) as they have different shrinking behaviour and this will screw with the tolerances.

Update 25.04.24: Added 2x4 brick