GLAMTIME | Hộp đựng túi nhặt phân cho chó

GLAMTIME | Dog potty bag dispenser

Stylish and easy to load. 
Meet GLAMTIME, a dog potty bag dispenser that you can easily strap to your belt loop or leash.

No need to struggle trying to stuff the outgoing bag into a hole. 
Simply slide the bag roll from the bottom into the slit, screw the bottom cap on, and there you go!

The strap prints-in-place into the dispenser. 
The bottom cap prints separately.

One dispenser is never enough. 
Maybe one to keep in the entry? 
And one in your car? 
And another tied to your bike, ready to take anywhere?

Print as many as you want. 
Mix and match the colours at will!

Happy printing!

DIMENSIONS | Ø 42.5 mm x H 90 mm 
Inner diameter: 38mm 
max roll height: 62mm

PRINTING | 1h

3D PRINT SETTINGS 
All STL files are already oriented properly. 
The dispenser prints upside down, the bottom cap prints upright.

Resolution: 0.2~0.3mm/layer or less 
(the dispensers in the pictures were printed in 0.2mm/layer) 
Infill: 20% 
Build adhesion type: None 
Supports: None