Shutter Fidget – Đồ chơi fidget mini êm tay

A mini quiet fidget with a lot of tactile feedback in its small frame.

https://youtu.be/M5QoJNZkU1U 

https://youtu.be/W6o0j-xrIEU

Printing

• All parts can be printed without supports.
• Add a brim if your printer has any difficulty with curling around sharp corners.

Assembly

• Wrap the shutter around the bottom case
• Optional: wrap a rubber band around the shutter to hold it in place
• Optional: add a few drops of silicone oil behind the shutter
• Align the top case with the shutter and bottom case
• Press firmly until the cases click together
• Optional: Use a clamp if cases don't click easily

Can I sell copies of this?

Yes! This project was shared under the Creative Commons - Attribution license.

This license allows selling copies, but you must provide proper attribution, as detailed in the license itself.

Please note that any other projects linked here (remixes or related projects) may have a different license. Please respect those licenses.

This license applies only to the model files (STL, 3MF, STEP, F3D) included in this project. It does not apply to photos, videos, my logo, or other supplemental graphics attached to or displayed with this project.
 

Recommended Attribution Text

"Shutter Fidget" (https://3dprinty.xyz/project/82) is designed by 3D Printy (https://3dprinty.xyz) and shared under a Creative Commons Attribution (CC BY 4.0) license (https://creativecommons.org/licenses/by/4.0/).