Skip to main content
F3D
Mâm/Bánh RC Drift – 12 mm Hex (RC Car (Drift) Wheels) 1

2 images

DIY

Mâm/Bánh RC Drift – 12 mm Hex (RC Car (Drift) Wheels)

By doggy

Downloads
1,144
Likes
124
Views
3,372

Files 2 1.6 MB

  • Drift_Wheel_Rear_1777131182.stlSTL · 811.7 KB
  • Drift_Wheel_Front_1777131183.stlSTL · 815.9 KB

Make a variant with AI

Build another version of this model.

Open Studio

Description

Initially, I designed this wheel for on-road drifting.

I created it for the Traxxas E-Revo 1/16 (VXL), but it may also fit other RC cars with a 12mm hex wheel carrier.

The front wheels are slightly narrower to provide enough steering clearance.

If you want the left and right wheels to have the same spoke orientation, you can mirror one wheel on each side in the slicer.

I recommend printing with the nice side facing up so that the support material leaves its marks on the inside.

In addition to just blank wheels, you can also browse my other models for TPU tires that can simply be slipped onto the wheels.
Since they don't require glueing, you can interchange them or switch back to bare drifting wheels.

Have fun getting sideways - Happy Printing!

Read more Show less

Print spec

Formats
stl
Model files
2
Total size
1.6 MB
Largest file
815.9 KB

0 comments

See all