Skip to main content
F3D
Khay Đựng Xà Phòng Treo Tường (Wall Mount Soap Dish) 1

7 images

Đồ Gia Dụng

Khay Đựng Xà Phòng Treo Tường (Wall Mount Soap Dish)

By wardy89

Downloads
128
Likes
18
Views
723

Files 4 1.4 MB

  • soap_dish_dovetail_loose_fit_mk2_1777118390.stlSTL · 4.6 KB
  • shower_soap_dish_mk2_1777118392.stlSTL · 1.2 MB
  • soap_dish_dovetail_additional_bonding_area_1777118393.stlSTL · 222.2 KB
  • soap_dish_dovetail_mk2_1777118394.stlSTL · 3 KB

Make a variant with AI

Build another version of this model.

Open Studio

Details

Model ID
#337946
Category
Đồ Gia Dụng
Published

Description

A good size soap dish thats easy to take off for cleaning.

The soap dish is attached to the wall using a dovetail joint, the one side of the dovetail is attached to the wall using 19mm wide VHB tape, the fitting has a indented area for the tape to be put so that the soap dish sits as close to the wall as possible. This makes it nice and easy to take it off the wall for cleaning.

I have included two versions of the wall side fitting, one that is a very tight fit so you can sand the edges to get a nice friction fit. The second version had additional clearance and should slide freely.

As a note this has been designed to be printed without support.

Category: Bathroom Summary

A good size soap dish thats easy to take off for cleaning.

The soap dish is attached to the wall using a dovetail joint, the one side of the dovetail is attached to the wall using 19mm wide VHB tape, the fitting has a indented area for the tape to be put so that the soap dish sits as close to the wall as possible. This makes it nice and easy to take it off the wall for cleaning.

I have included two versions of the wall side fitting, one that is a very tight fit so you can sand the edges to get a nice friction fit. The second version had additional clearance and should slide freely.

As a note this has been designed to be printed without support.

Printer Brand:

Prusa

Printer:

I3 MK3S

**Rafts:**

No

Supports:

No

**Resolution:**

0.2

Infill:

10%

**Filament:** real Filament petg

Read more Show less

Print spec

Formats
stl
Model files
4
Total size
1.4 MB
Largest file
1.2 MB

0 comments

See all