Skip to main content
F3D
Hộp đựng dạng máy giặt (Washing Machine Box Container) 1

7 images

DIY

Hộp đựng dạng máy giặt (Washing Machine Box Container)

By daann_ii

Downloads
138
Likes
55
Views
849

Files 6 553.9 KB

  • windowGlass_1777095929.stlSTL · 12.4 KB
  • screwtip_covers_1777095930.stlSTL · 20.2 KB
  • knobs_1777095931.stlSTL · 80 KB
  • door_full_1777095932.stlSTL · 106.3 KB

Make a variant with AI

Build another version of this model.

Open Studio

Description

This washing machine container has a base of 100x100mm when printed at 100%. You may want to size up a little bit to hold a full bag of laundry pods, depending on how many pods you buy.

I made this with really strong hinges and that is why the main body prints in two pieces.  The box snap lid stays closed very well.  The hinges still worked fine for me at 60% size but they are definitely thin and probably will not be very durable.

The top and bottom pieces connect with two screws.  You could technically just glue the top and bottom parts together but I recommend using two screws.

At 100% the hole is a M3 size but you can use a m4 or m5.  If the screws you have are a little long and stick out, you can use the screw cap model file to print some covers. You probably don't want sharp things sticking into the container, especially if you plan on putting laundry pods or your hand in it. 

I used some plastic material from a food container (cleaned and glued) for the door window.  If you don't have any clear material laying around, I have included a round disk that you can print that can be glued to the inside to create a barrier at the door window. 

I printed the knob file with a “color change at layer” to get two colors.  This model does not require a multi color printer. 

I recommend using E600 glue or an epoxy glue for the parts that need glued on. 

NO SUPPORTS NEEDED. BUT YOU MAY WANT TO USE A BRIM AND TURN FAN OFF FOR THE FIRST 20 LAYERS FOR TOP AND BOTTOM PARTS TO REDUCE WARPING.
 

This model is 100% mine.  I give permission for remixes with attribution and selling of item (with attribution, please).  I do not give permission to sell the model file.  And I would prefer if remix models also remain free. 

This model was completely made on tinkercad.

Read more Show less

Print spec

Formats
stl
Model files
6
Total size
553.9 KB
Largest file
193.6 KB

0 comments

See all