Móc khóa quyển sách (Book keychain)

Lovely book keychain which comes in 2 flavours.

1. Plain book

Print the book cover in any color you like. The paper should be printed white. 2. Langenscheidt book

Langenscheidt is a German media company famous for its dictionaries. They have the iconic blue L on the yellow ground as their identification.

Print Settings

Printer Brand:

Flsun

Printer:

Flsun V400

Rafts:

No

Supports:

No

Resolution:

0.2 mm initial layer, 0.2 mm layer height

Infill:

20 %

Filament: GIANTARM, 3DJake ECOPLA PLA Green, Yellow, Light blue, White

Notes:

Should be an easy print. No supports needed. There are guides in the paper and in the cover to make the assembly and glue job easy for you.

If you print the plain book, just print "Book keychain plain book V1.stl" and "Book keychain paper V1.stl".

If you print the Langenscheidt book, print "Book keychain book Langenscheidt V1.stl", "Book keychain paper V1.stl" and "Book keychain paper text Langenscheidt V1.stl".

Post-Printing

Book keychain assembly part 1

Print the cover and the paper.

Book keychain assembly part 2

Peel a string though the hole in the paper twice to form a sling outside of the paper.

Book keychain assembly part 3

Add a knot. Make sure the sling has the size you like.

Book keychain assembly part 4

Cut the string as shown on the picture. Put some glue onto the knot and the remaining ends of the string to make sure that the knot will not accidently open once everything has been put together.

Book keychain assembly part 5

Add glue to the inner, upper and lower side of the paper. Slide the paper into the cover. Put some heavy item onto the assembly till the glue is hard.

If you assemble the Langenscheidt book, glue the "L" to the cover.

Category: Keychains