
Giá gắn quạt làm mát bed ZERO G dùng blower 12032
- Downloads
- 113
- Likes
- 12
- Views
- 998
- Remixes
- 0
- Comments
- 0
Files 1 1.8 MB
- 12032_BED_COOLING_1777084637.stlSTL · 1.8 MB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #336624
- Category
- Máy In 3D
- Published
- License
- Creative Commons — Public Domain
Description
Im inpatient to wait for pei sheet cool to get it out build plate so this gonna help it cooling quicker. I add gcode for it so when it finish the print i will move bed all the way down and fan will kick on until temp reach certain degree then turn off. And because i set my temp at 50C every time for level bed every time it start the print so it help when parts failed and you can cool it down quicker and start it again quicker.
The model height is 144mm from base to top make sure if your bed can move all the way down to right where that fan at before you print it.
Notes:
This model is for 12032 blower fan have 2 hole chamfer in the back side other fan might not fit (i will include picture for this)
https://www.amazon.com/dp/B0C6D89BQJ?psc=1&ref=ppx_yo2ov_dt_b_product_details
2xm3 for the base mount
3xm4 bolt and nut for fan mount
Print Settings
Printer:
ZERO G
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
0.2
Infill:
20% or more
Filament:
INLAND ABS YELLOW
Print spec
- Formats
- stl
- Model files
- 1
- Total size
- 1.8 MB
- Largest file
- 1.8 MB
0 comments
You may also like 12 models
See all-

-

-

-
New -
New -
New -

-

-

-

-

-


