
Hộp lưu trữ Gridfinity - Nắp phẳng/trơn 5x5
Remix of Hộp lưu trữ Gridfinity Parametric bởi Pred (Bản nâng cấp) By Pred_457770
- Downloads
- 164
- Likes
- 35
- Views
- 2,460
- Remixes
- 0
- Comments
- 0
Files 2 1.2 MB
- GridfinityStorageBox_5x5_smooth_Lid_STL_1777077310.stlSTL · 627.9 KB
- GridfinityStorageBox_5x5_smooth_Lid_V2_STL_1777077311.stlSTL · 632 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #336294
- Category
- DIY
- Published
Description
Ich wollte einen glatten Deckel für die Gridfinity Storage Box 5x5 von Pred.
@Pred Vielen Dank für Deine tolle Box.
Da ich mich mit keiner richtigen 3D Software auskenne, habe ich den Deckel in Tinkercad überarbeitet. Es ist alles gleich geblieben außer, dass die Oberfläche glatt ist. Es gibt eine Version mit den Rastpunkten in den Ecken (V2) und eine ohne.
Ich habe folgende Einstellungen mit meinem Bambu P1S verwendet:
PETG-CF
0,24 mm draft
Arachne
2 Wandlinien
15% Füllung Gyroid
4 Obere Schichten
3 Untere Schichten
Stützen:
Baumstruktur mit PLA Schnittstelle für glatten Übergang
deepl.com - translate:
I wanted a smooth lid for the Gridfinity Storage Box 5x5 from Pred.
@Pred Thank you very much for your great box.
Since I'm not familiar with any real 3D software, I redesigned the lid in Tinkercad. Everything stayed the same except that the surface is smooth. There is a version with the snap-in points in the corners and one without.
I used the following settings with my Bambu P1S:
PETG-CF
0.24 mm draft
Arachne
2 wall lines
15% filling Gyroid
4 upper layers
3 lower layers
Supports:
Tree structure with PLA interface for smooth transition
Translated with DeepL.com (free version)
Print spec
- Formats
- stl
- Model files
- 2
- Total size
- 1.2 MB
- Largest file
- 632 KB
0 comments
You may also like 12 models
See all-

-

-

-

-

-

-

-
New -

-

-

-


