Skip to main content
F3D
Extruder Mini Feeder cho Creality K1 1

5 images

Máy In 3D

Extruder Mini Feeder cho Creality K1

By SE_325291

Downloads
102
Likes
27
Views
1,103

Files 3 117.8 MB

  • Mini_feeder-_k1_1777068657.stlSTL · 1.6 MB
  • K1_Riser_1777068658.stlSTL · 634.6 KB
  • MiniFeeder BMG K1.stepNot available yet

Make a variant with AI

Build another version of this model.

Open Studio

Description

The basis extruder was taken from Dmitry Sorkin’s mini-feeder, and adapted for the “creality k1” print head. (original model: https://k3d.tech/minifeeder/ )

. For assembly you will need a BMG kit, screws and bushings with M3 threads - (but you can do without them).
You will also need to raise the cable channel by installing spacers so that the extruder motor does not catch on it during calibration.

Using this extruder I managed to achieve stable printing of TPU A95 with a volumetric flow rate of 5-7/mm3

Recommended printing parameters for ABS GF/CF nozzle 0.4mm, height 0.1-0.12 width 0.4 (with supports)

https://aliexpress.ru/item/1005003334389217.html?spm=a2g2w.orderdetail.0.0.4ad94aa6c5lB4N&sku_id=12000033842333980

https://aliexpress.ru/item/1005002109863123.html?spm=a2g2w.orderdetail.0.0.21804aa6kJyqLk&sku_id=12000018775202479
 

https://aliexpress.ru/item/1005001710197161.html?spm=a2g2w.orderdetail.0.0.1b1e4aa6s1aypn&sku_id=12000017245956152

stock stepper motor RD - 5.4
 

stepper motor with 10-tooth gear RD - 4.5 
for a stepper motor with 10 gear teeth, I had to reduce the thickness of the rear part by 2 mm, since the gear rod is shorter.

Read more Show less

Print spec

Formats
stepstl
Model files
3
Total size
117.8 MB
Largest file
115.5 MB

0 comments

See all