Dock/Stand Steam Deck cho Anker USB-C Hub

A Steam Deck stand/dock with a slot for an Anker USB-C hub. The original model used a rubber band to hold the USB-C hub in place, but I modified the model so that the rubber band is no longer needed but can still be used. The dimensions of the hub that will fit in the slot are 55 mm wide and 15.4 mm thick. My OLED Steam Deck fits and the original model was designed for the original steam deck, so either will work. 

The dock I'm using is here: https://www.amazon.com/Anker-Upgraded-Delivery-Pixelbook-A83460A2/dp/B07ZVKTP53/

The dock it was originally designed for is the 8-in-1 I believe: https://www.amazon.com/Anker-PowerExpand-Adapter-Delivery-Ethernet/dp/B087QZVQJX/

There are 2 models. One is the first remix I made that just has the additional support that holds the USB-C hub up so it doesn't fall over without a rubber band. The other model is the same plus it extends the tail behind the stand which should help with stability. I have not printed that one, but it might need basic support under the tail if your printer can't print lower than a 25 degree overhang. I believe the overhang angle is 22 degrees. 

I printed this at 35% gyroid infill just to give it additional weight at .2 layer height. It will print fine at 15% infill if you want to save some filament. 

Filament used - ELEGOO PLA Galaxy Black: https://www.amazon.com/dp/B0C8HY16ZD

Printer Used: https://www.creality.com/products/creality-ender-3-v3-ke