Đồng Hồ Động Cơ Phản Lực (Jet Engine Clock) Multicolor

New Multicolor version of jet engine clock remixed from models by CATIAV5FTW. It has the following upgrades.

• In this version fan and cone are mirrored to match clock movement.
• Multicolor fan
• Spinner can be printed in one piece instead glue the stripe
• The nacelle and the stands can be printed in different colors, the old version was design to print with single color change.

I printed with a multicolor printer, but it can be printed separately and glue part (didn't try). For single color, split the STL's in slicer and print separately

For Bambulab profile: https://makerworld.com/en/models/472191#profileId-381951 

Assembly tips:

1. The numbers fit in an specific blade, so first find the correct place to add the clock mechanism correctly. Use the picture a reference.
2. You may need to cut clock hands to fit insede the engine
3. Glue the spinner to the clock the second hand, the cone has gaps in the botton to fit the hand.

For the mecanism i use this one from amazon:

https://www.amazon.es/dp/B0C4TMR43L?ref=ppx_yo2ov_dt_b_product_details&th=1

the model is design for these dimensions. Specially important the 22mm core.

Note: the number 1 has a part that may has issues at printing due to a very thin section. Just remove it, the number can be glued to the fan without problem. I will try to solve as soon as possible.