Bộ lót ly cho fan Star Wars (Coaster Set)

Star Wars symbols coasters 

Print time is more or less around 1h30m at 0.2 layer heigh (0.4 mm nozzle) for the coaster.

Coaster diameter: 90 mm and 2.6 mm height

Print parameters:

• Layer height - 0.2 or 0.16 mm
• Perimeters - 3
• Infill - 10% is sufficient
• Brim - NO 
• Support - NO
• Raft - NO
• Filament type - PLA or any

Could be printed even in multicolor without MMU, AMS or similar.

For multicolor print:

When printing at 0.2 layer height: put the printer in Color Change mode(G-code M600) at layer 11 and then change filament
When printing at 0.16 layer height: put the printer in Color Change mode(G-code M600) at layer 13 and then change filament