Angel of Death Hueforge

AI generated image of an Angel of Death.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

The Model is 117.11x150.63mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 2.2mm and the Actual Depth is 2.2mm

Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA Overture Matte Skin Transmission Distance: 0.7
PLA PolyLite White Transmission Distance: 5
This print uses 4 unique filaments

Swap Instructions:
Start with Black
At layer #11 (0.96mm) swap to Blue Gray
At layer #18 (1.52mm) swap to Skin
At layer #22 (1.84mm) swap to White for the rest.