9 kích cỡ kẹp dây bắt vít (3mm–12mm)

Design inspiration  

Ive seen a few similar models of cable clips, in different sizes to accomodate different size cables. However, most of them are either nail-in or screw-in, but never both. 

Additionally, i've not been able to find cable clips that can run multiple cables side-by-side in varying sizes. 

So that is why I designed this set of cable clips to accomodate cables from 3mm all the way up to 12mm. With single, double and quadruple clips offering a versatile range of cable management options. To top things off, each clip is available in screw-in or nail-in so you can choose the best mounting solutions for your application. 

Screw In Option

The screw holes are designed, for a 3mm screw, with a 5.2mm counter sunk section. I designed the holes to works with the screws in IKEA's ‘TRIXIG 200 piece screw set' or ‘FIXA 200 piece screw set’. However, any small screw should work. 

Nail In Option

The nail holes are 1.2mm wide, with a very slight taper at the top, intended for a 1mm bullet head nail. IKEA no longer offers packs of nails, however any hardwares store should should have suitable nails.  

Pictured clips print settings 

I printed the clips in a generic unbranded PLA, using 0.4mm nozzle and 0.2mm layer height. I have also tested these to make sure PETG works, but i am unsure if other types of filament would work.