Skip to main content
F3D
Northern Cardinal “puzzle” – Chim Hồng Y Đỏ lắp ráp 1

14 images

Đồ Gia Dụng

Northern Cardinal “puzzle” – Chim Hồng Y Đỏ lắp ráp

By FinleySchulz_1079484

Downloads
1,021
Likes
252
Views
4,926
Remixes
1

Files 12 42.2 MB

  • cardinal_body_high_crest_1777014307.stlSTL · 9.2 MB
  • cardinal_body_low_crest_1777014309.stlSTL · 8.4 MB
  • cardinal_body_medium_crest_1777014311.stlSTL · 9 MB
  • cardinal_body_with_face_1777014313.stlSTL · 10.5 MB

Make a variant with AI

Build another version of this model.

Open Studio

Remix versions 1

See all 1 remix

Description

- Version 1, 14/03/2023 :

A Northern Cardinal or Red Cardinal (Cardinalis cardinalis).

This model is assembled with several parts and there are several poses available, depending on the parts you will be using.

The crest has 3 positions : 
L. low
M. medium
H. high. 
At first I wanted a movable crest but it was too complicated, maybe in the future.

The paws come with 3 variants : 
a. Standing with a base.
b. Standing (the tail don't touch the floor), you will need to glue the paws to a base. 
c."leaning", the tail will touch the floor.

The face (e) and the beak (f) are separated to be printed alone.

There is also a body merged with the face and the beak.

HOW TO 

The last pictures show how to print the main parts (support), you will need some glue for the face
I highly recommend to print the face and the beak with 0.1mm layers (but it work with 0.2mm). 
The body can be printed with 0.1 or 0.2 mm layers. I have not tested with thicker layers.
I used  70° max support to allow easy cleaning.
The paws can be printed with 0.2 layers or more.

If you want to fast test the assembly between the elements, I added a cropped face-body-part-thing (d).

If you want the same result as the first picture, it's the M + c + e + f parts.

Read more Show less

Print spec

Formats
stl
Model files
12
Total size
42.2 MB
Largest file
10.5 MB

0 comments

See all