Giá treo tay cầm PS4 (PS4 Controller Holder)

Behold, 3D Printing and Gaming Enthusiasts!

This is my solution for a PS4 controller holder that just works. I needed a holder that worked for me and had the features I wanted most, so I designed this print to include the following features:

• Can mount on a wall using just command strips
• Don't need to unplug the cable to hang it up
• Easy to use, but holds the controller securely

Print in one piece See the section "Print Settings" for the two ways to print this model. As always, if you have any suggestions to improve my designs or just have question, let me know in the comments.

Thanks!

- Ty10y

Print Settings

Layer Height

0.2mm recommended

Perimeters 

More = stronger

Infill

Any

Supports 

Needed for “orientation 1", not for “orientation 2”

Raft/Brim

Recommended if printing “orientation 1” to help with bed adhesion

Skirt 

Not needed

Orientation

1. Print on it's side with support between the cable gap
2. Laying flat with no supports (beware steep overhang angles and fillets)

Notes

See below for orientation pictures

Orientation 1:

Orientation 2:

Revision History

Apr 6th 2019

• Published original model to Thingiverse

Dec 20th 2021

• Published original model to Printables