Hộp tham số cho Moose 3D Scanner (Yet Another Parametric Box)

Others have created something similar but do to the games Bambu  Labs plays with the 3mf file,  the current version of  Prusa Slicer wouldn’t open the file.  So I set out to make my own version.  I have included the STLs and one 3mf if you want to use or modify the script on the cover of the box that I have in the picture.  My version uses the foam from the box that the scanner came in that held the scanner and the power brick.  I also create a divided tray with a notch that will allow the wrist strap to fit through to the section that the USB  cable fits in. The second section will hold the 3d Maker Pro tripod or a similar small phone one.  I  used standard self-stick felt pads over the scanner and power pack to stop the scanner from getting scratched up and add a little bit of protection. I also wanted to have a handle to carry it.  For hardware you will need four M3x30 screws and two M3x35 screws if you want to use the handle or six M3x30 screws if you don’t want the handle.