Case Heltec V3 có logo Meshtastic

By TejasavThind_2166168

Downloads: 942
Likes: 74
Views: 4,566
Remixes: 0
Comments: 0

Download all (.zip)· 4 files · 394.2 KB· 394.2 KB

Files 4 394.2 KB

heltec_v3_front_1776923833.3mf3MF · 198.7 KB
heltec_v3_Back_1776923834.3mf3MF · 83.3 KB
heltec_v3_button_v2_print_it_twice_1776923835.3mf3MF · 75.6 KB
heltec_v3_button_v2_1776923835.3mf3MF · 36.6 KB

Make a variant with AI

Build another version of this model.

Open Studio

Details

Model ID: #329749
Category: DIY
Published: 04/23/2026
License: Creative Commons — Attribution — Noncommercial — NoDerivatives
Tags: meshtastic
lora
heltec
heltecv3
lorawan
heltecv3case
makerfocus

Show more tags Show fewer tags

Description

These models are intended for personal use only.
DO NOT copy, sell, trade or otherwise gain from my designs without my explicit permission.

Please respect the Creative Commons license restrictions I have chosen (http://creativecommons.org/licenses/by-nc-nd/4.0/) if you see the case for sale anywhere please reachout.

Another case for Heltec v3 board designed with the Meshtastic project (https://meshtastic.org) in mind that accepts 3000mah battery by maker focus.
Has a cutout for the sma antenna connector so the antenna doesn't move when you screw or unscrew the antenna.

Keep in mind the back side of the heltec board should go in first and the usb-c side. You will need to push the usb-c side of the case for the board to fit. If you want to remove the board from the case you will need to push the usb c side of the case and then apply gentle pressure to the screen.

Required hardware:
1 LiPo battery Amazon Link
1 Heltec v3 Amazon Link

Meshtastic® is a registered trademark of Meshtastic LLC.
Amazon links are for reference. I donot earn anything from the above links.