Thử nghiệm in nhẫn rồng Shakaworld3D trước khi in hoàn chỉnh

Thank you for taking the time to view this design, I hope you like it. Please consider following me and joining my club.
There are two support tiers, one for those of you that wish to have access to my exclusive models and those of you that
wish to print and sell your prints(not my digital designs).  In either tier you will have access to all of my available public and exclusive designs.

You can show a printed model of my design in video or in an ad related to 3d printing all other types of video/ads please contact me.

Thanks again

This is a great print in place design to test all of your printer settings.  I normally print it with a .6 nozzle .18 layer height.  It is good to print this to check your settings/filament before printing the full dragon.  Supports are not needed however depending on your printer bed adhesion a brim is helpful I normally set the distance of the brim at .27 or .28 for easy brim removal.

Let's see how fast and accurate you can print it, when posting your make please post the time it to print and the size percent - thanks