
Máng xả Bambu Poop Chute
- Downloads
- 113
- Likes
- 24
- Views
- 1,051
- Remixes
- 0
- Comments
- 0
Files 2 310.1 KB
- Poop_Chute_1776897808.stlSTL · 217.1 KB
- Poop_Chute_1776897810.stepSTEP · 93 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #328718
- Category
- Máy In 3D
- Published
- License
- Creative Commons — Attribution
Description
Since I have the left side of my Bambu up against a wall, I needed to get the poop out easily. So, I just dump it through the crack between the table and the wall. I have a cardboard box under the table to catch everything.
You can update the model to fit your situation here on OnShape - https://cad.onshape.com/documents/ca048f137ebdf4a324a3f568/w/bf3700028f178d48637fb435/e/6ca44c36f7532d1eaf5a47f1?renderMode=0&uiState=6678584a4fdfc82ea35c5cbb
This model is for a printer that is 130mm from the edge of the table and with a 25mm gap between the table and the wall.
Supports - I printed it standing upright, but it could probably be done differently. I just added a Support Enabler rectangle up the back just to add support. It was just down the middle since the angle is not terrible.
FYI - The model in the picture is 20mm shorter than the one uploaded here. I updated the model after the print.
Print spec
- Formats
- stepstl
- Model files
- 2
- Total size
- 310.1 KB
- Largest file
- 217.1 KB
0 comments
You may also like 12 models
See all-

-

-

-

-

-
New -
New -
New -

-

-

-


