Cửa Sovol SV08 (JLS Mod V1)

The filenames have "x1" or "x2" depending on the number of units that have to be printed, they are positioned with the advised printer orientation.
The file with "everything" has all the needed parts with some supports for better printing stability.

It is advised to print in ABS/ASA, there are already mouse ears in the most critical parts, however a Brim may be needed to keep everything stuck to the plate.

BOM

• Printed parts;
• 8 20x2 coin magnets;
• 24 M3x10 bolts;
• 4 M3x40 bolts;
• 28 M3 nuts.

Don't forget to add the enclosure pannels, also consider using the Sovol SV08 Doors (JLS Mod V2) instead of this model!

Thankyou to Richard Ferrington and Mathew Clark for all the feedback and testing.