Giá đỡ thẻ Usb, SD và MicroSD kiểu Skadis T-Nut

HOW TO:

First of all, thank you for downloading my model :D

So you will needT-Nuts Mounting System made by @6d6178.

When you got the t-nuts printed with or without optional adapters you need to slot the screws into holes and then loosely screw M2/M2,5 screws (i used m2,5x20 but you can do it with shorter ones). 
Then you just slot in the contraption and screw it in (you will need longer screwdriver/hex wrench and bit type screwdriver won't work as its too wide).

Print settings:

• Speed: any (depends on printer)
• Infill: 10-100%
• Number of walls: 3-infinite

If you wish you can donate on my ko-fi page.