Khay Marker Nam Châm cho Hardcase Creality CR Scan Otter

This tray replaces the owl that is provided with the CR Scan Otter and allows for storage of up to 12 magnetic markers. 

I modified the marker pyramids to use magnets with a diameter of 6mm and a thickness of 5mm. But the original pyramids with 10x3mm magnets also do fit in here. They are meant for 10mm reflective markers.

Since the bottom of the tray had to be tapered, the bottom row of the markers has to be inserted upside down. For the top row I would recommend to install the magnets in the opposite direction. This way the markers sit tightly in their position and don't wiggle around and you can easily pull out both markers by grabbing the top one. If all the magnets are alligned the same, you can also flip the top row upside down, but the markers might be a bit lose in this case.

I printed the tray in ASA which creates a nice friction fit in the hardcase. If printed in another material it might be necessary to scale it down a tiny bit.