Skip to main content
F3D
Giường Bluey & Bingo (khung giường và nệm) 1

4 images

Figures & Action Figures

Giường Bluey & Bingo (khung giường và nệm)

By cassidyjames

Downloads
254
Likes
52
Views
2,292
Remixes
1

Files 2 438.3 KB

  • Bluey_Bed_-_Cassidy_James_Blaede_1776837144.stlSTL · 436.8 KB
  • Bluey_Mattress_-_Cassidy_James_Blaede_1776837145.stlSTL · 1.4 KB

Make a variant with AI

Build another version of this model.

Open Studio

Remix versions 1

See all 1 remix

Description

I found some cute doll furniture and then my kid and I got on a kick of adapting and printing them for their Bluey playset figures. Eventually, they wanted beds for Bluey and Bingo. Nothing looked quite right, so I fired up TinkerCAD and designed my own, referencing stills from the show.

If there's interest, I may design a modified mattress with a cut-out for tails so they can lay on their backs, but it seemed too complicated for a first go. :)

These are probably fine as generic doll house beds, too! Feel free to remix—I’d love to see what you come up with.

The bed prints flat in three pieces, to be assembled after printing.

Bed Frame

The pieces press-fit which may be fine for display, but I would highly recommend gluing, e.g. for play. I used Gorilla Contact Adhesive Clear Grip (like E6000 contact adhesive), and it worked much better than hot glue (which added too much bulk to the connections).

Feel free to tweak for your own printer/preferences, but I used:

  • Layer height: 0.28mm
  • Nozzle: 0.4mm
  • Walls: 2
  • Infill: 7% gyroid
  • Bed adhesion: 4mm brim (recommended due to small details like bedpost finials)

Mattress

 Feel free to tweak for your own printer/preferences, but I used:

  • Layer height: 0.28mm
  • Nozzle: 0.4mm
  • Walls: 2
  • Infill: 5% gyroid
  • Bed adhesion: none

Read more Show less

Print spec

Formats
stl
Model files
2
Total size
438.3 KB
Largest file
436.8 KB

0 comments

See all