Skip to main content
F3D
Star Trek: Picard – Combadge Confederation… 1

1 image

Cosplay

Star Trek: Picard – Combadge Confederation (thực tại thay thế)

By UnimatrixRed

Downloads
410
Likes
95
Views
1,605

Files 15 2.7 MB

  • Picard_CoE_Combadge_-_Stand_Base_1776832401.stlSTL · 179.7 KB
  • Picard_CoE_Combadge_-_Stand_Tag_1776832402.stlSTL · 922.7 KB
  • Picard_CoE_Combadge_-_4_bar_-_gold.stl_1776832404.stlSTL · 98.1 KB
  • Picard_CoE_Combadge_-_1_bar_-_gold.stl_1776832404.stlSTL · 53 KB

Make a variant with AI

Build another version of this model.

Open Studio

Description

Here is my version of the Confederation of Earth combadge from the alternate reality seen in Star Trek: Picard season 2. Has a removable rank/power cell. 

Update February 1 2023 - Since the face of the badge is more of a brushed metal and the ‘blade’ parts on the sides are supposed to be shiny, I split the model so the face can be printed separately to help get those different textures. The rank pieces have been update to fit the extra thickness from the split face, but the originals are still there too. 

Update January 24 2023 - Fixed the size of the badge since it was too small. There was a recently published photo of the prop badge next to a ruler so the correct size is about 3 inches by 2 inches. Should make printing it a little easier too. The backing is unchanged and will still fit. The stand leg was raised a little. Also added a version of the delta standing vertical for a different print orientation. 

Since the front face of the Delta is slightly rounded, printing the badge flat makes the top surface look jagged and not so neat. Therefore I printed it tilted at a 45 degree angle which turned out well enough by using tight support settings to hold it down. You can probably find a better angle to print it at. 

Use supports for the badge parts. Fitted for 6x2mm magnets but can add other sizes upon request. 

Display stand included. Use color swap for the tag. Here is a guide that explains how color swapping works, at least with Prusaslicer: https://help.prusa3d.com/en/article/color-change_1687

Read more Show less

Print spec

Formats
stl
Model files
15
Total size
2.7 MB
Largest file
922.7 KB

0 comments

See all