Bộ nhiều mẫu kệ cho Multiboard

Set of six different style Shelves for Multiboard.
 

This is similar set like I have done for Honeycomb storage wall (HSW) which can be found here . But in this set I have added one extra shelf and redesigned Shelf Nr6 to eliminate any need of supports. So yes, No supports needed here at all. Little assembly needed for Shelf Nr6. My Advise there is to use a Superglue to fix Separate pegs to the Shelf itself. But in most cases it is not necessary. As on all of my Multoboard models I Recommend to use A Weight Bearing Snaps or Tight snaps to fit shelves to Multiboard as my experience of using ordinary snaps shows them are too loose and can fall out any time.

Here are Sizing chart of all shelves presented:

Shelf Nr1

Width - 103mm
Depth - 53mm

Height - 30mm

Shelf Nr2

Width - 103mm
Depth - 53mm

Height - 30mm

Shelf Nr3

Width - 103mm
Depth - 71mm

Height - 30mm

Shelf Nr4

Width - 120mm
Depth - 65mm

Height - 9.60mm

Shelf Nr5

Width - 85.60mm
Depth - 46.60mm

Height - 16.80mm

Shelf Nr6

Width - 120mm
Depth - 61mm

Height - 10mm

That's ALL. Enjoy.

You can Buy me a coffee if You feel good doing so :) (And very big Thank You For interest in my work)
https://www.buymeacoffee.com/warlogh