Skip to main content
F3D
Tay cầm cho Elegoo Saturn 4 (Ultra) Handle 1

1 image

Máy In 3D

Tay cầm cho Elegoo Saturn 4 (Ultra) Handle

By linycv

Downloads
172
Likes
20
Views
1,797

Files 5 8.9 MB

  • handleFile_1776778924.stpSTP · 90.6 KB
  • handleGap_1776778925.stpSTP · 78.5 KB
  • handleGap_1776778927.stlSTL · 4.2 MB
  • handleFile_1776778928.stlSTL · 2.8 MB

Make a variant with AI

Build another version of this model.

Open Studio

Description

A simplified handle that's fast and easy to print, and also matches the style of the printer.

There's two versions of the handle, gap and file

  • Gap
    Can be installed without making any modifications of the printer lid, but will cause a slight gap when the lid is closed.
  • File
    will need to file down the inner lip of the lid by 3 mm, allows the lid to fully close as before
    model is adjusted to have a tighter fit, allowing the lid to truely fully close
    score the lid with a caliper then file down to the line, took me about an hour to file it down with a jewlery file. Would be a lot faster if you have access to power tools. 

Acrylic dust is not toxic, but PPE still recommended. Also recommened to cover up the vat, otherwise cleanup is quite the pain.

The two files have slightly different geometry, so you'll have to decide which one you want.

Handle span the whole length of the left front side, you can scale the model in Z direction to print a narrower handle.

Also on MW: https://makerworld.com/en/models/562407

Read more Show less

Print spec

Formats
3mfstlstp
Model files
5
Total size
8.9 MB
Largest file
4.2 MB

0 comments

See all