Búa Dead Blow Hammer

If you want to copy my hammer here is the settings and stuff I used to make it.

A+B part PETG 0.4 nozzle - 0.2 layer height 20 Walls and top and bottom 50% Cubic infill

C part TPU x2  3 walls and top and bottom 50% Cross Hatch infill

3x  3x16 plastic screws (see screw kit like below)

2x  3x20 plastic screws (see screw kit like below)

40x Steel 4.5mm BBs .177cal (see type like below)

https://www.aliexpress.com/item/1005006313753992.html?spm=a2g0o.order_list.order_list_main.35.375418027norbb
 

https://www.aliexpress.com/item/1005007489648771.html?spm=a2g0o.productlist.main.3.2e10hKzxhKzxLP&algo_pvid=75ac4e41-d5f4-4e8a-8d0e-cf7ce92e8102&algo_exp_id=75ac4e41-d5f4-4e8a-8d0e-cf7ce92e8102-1&pdp_npi=4%40dis%21USD%2119.29%2119.29%21%21%21137.71%21137.71%21%40211b619a17238202863562278e958c%2112000040988871172%21sea%21DK%214609794172%21X&curPageLogUid=KbqaTRZmHYjB&utparam-url=scene%3Asearch%7Cquery_from%3A
 

Hope you enjoy my work 😉