Giá đỡ đèn LED trước cho Surron (Surron front LED Mount)

Model

This allows you to mount an Led headlamp onto a Surron or Enduro ebike using the 4 screws on the top of the front forks.

Print Settings

I would highly recommend printing these with at least 4+ perimeters and at least 3 bottom / top layers.

Parts needed

1x Surron front LED light
2x M5 Screws (included with light)
4x M5 Screws

Print Settings

Supports:

Not needed

Resolution:

0.12mm

Infill:

30%+

Perimeters:

At least 4x

Filament: Any PLA, PETG, ABS, Nylon or any other sturdy filament.