Mũ Samurai đội được (Samurai Helmet wearable)

Hi Folks

been thinking about doing one of these for quite a while, and here it is.

Fully wearable, the current size is about 200mm helmet bowl so scale to suit.

It is quite a long print with each part taking about 1 ,1/2 hours at 0.25

orient the parts for best printing, I found the peak to be best printed on its two ends, supports are needed on most, but they are quite small supports.

Some of the parts are obvious like 'Front plate x3.stl' print 3 off, otherwise print x1

you will need to glue the parts together but they do have location tabs to help.

there are some different parts so choose the ones you like

Next job is to paint it

Enjoy and if you print please post pics

Thanks for looking

Just added painted pics, a quick spray of matt black then restrung and the crest in gold

Print Settings

Printer Brand:

Up

Printer:

Up Plus2

Rafts:

Yes

Supports:

Yes

Resolution:

.25

Infill:

20%

Filament: Tiertyme ABS

Notes:

used various reels for this as was printing other things at same time, some supports needed but they are small, assemble with glue.rnNoternThe Helm Plates are best printed on their side.

Category: Props