Phụ kiện nối dài băng đạn Venom Pro

I made this remix after printing the mini-talon extender FetteWorst made and realizing it needed some tweaking to work with the Venom Pro mag.

The spring in the Venom Pro mag is too short to support the 5 extra dart capacity. It is possible that it would work to size it to be 4 extra darts, but decided on 3 to bring the capacity up to 15 to match Nightingale mag size.

The Venom Pro mags have a notch at the bottom on each side. I added tabs on the inside so that the mag will click into these notches to help hold onto the magazine and not rely on a friction fit.

PRINT SETTINGS 

Infill: 0%
Layer Height: .20
Walls: 3
Supports: None

UPDATE 8/29/2024

Updated the stl file as there was an issue with the original that the spring would catch and not allow the follower to slide into the extender. I named the file “venom-pro-mag-extender-fix” to help determine the difference if you downloaded the original.