Dốc xe RC (RC Car Ramp)

Simple RC Car Ramp - 2 verisions 

1, Once peice parts - Will need a big printer to Print in single peices. (400mm +) - No Supports required. I made it on a CR10 Max

You will need:-

10x M5x30 Screws

3mm plywood - 410 wide x 420 long - ensure the ply bends with the 410 width.

2, Split Parts - Will need minimal supports on the sides or you can bridge over the slot with no supports. Designed to be printed on an ender 3.. I havent tried it.. so feedback welcome!

You will need:-

10x M5x30mm Screws

6x M5x20mm Screws

3mm plywood - 410 wide x 420 long - ensure the ply bends with the 410 width.

Put it together and have fun!