
5 chân nến tealight (5 mẫu khác nhau)
- Downloads
- 662
- Likes
- 144
- Views
- 1,996
- Remixes
- 0
- Comments
- 0
Files 5 1.9 MB
- Green_1776690561.stlSTL · 40.8 KB
- Black_1776690562.stlSTL · 52.5 KB
- Blue_1776690563.stlSTL · 64 KB
- Pink_1776690564.stlSTL · 316.6 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #318182
- Category
- Đồ Gia Dụng
- Published
Description
I printed them all with 0.15 layer height with a 0.6 mm nozzle and with 5 different matt PLA filaments.
Print time with those settings are between 9 to 12 hours each, so if you don't might a rougher surface look, feel free to use a higher layer height.
The files are named after the colors of the print.
No support or brim needed.
AVOID STRINGING!
Make sure you're print setting doesn't course stringing, otherwise these models will have a lot between each of the spokes/pillars.
If you have stringing, dry your filament and print a temperature tower. You're most likely printing with too high a temperature.
Print spec
- Formats
- stl
- Model files
- 5
- Total size
- 1.9 MB
- Largest file
- 1.5 MB
0 comments
You may also like 12 models
See all-
New -
New -

-

-

-

-

-

-

-

-

-


