Thước đo chiều cao Gridfinity Height Gauge

Simple gauge to measure Gridfinity bin height up to 12U

Can be used to measure:

• Height of an existing bin
• A drawer to determine maximum bin height
• An object to determine how tall of a storage bin it requires

Usage notes:

• Measuring bins. Use the left side. The black bar is 3.75mm wide, corresponding to the additional height of a stacking lip.
  • Use the lower edge of the bar for bins without a stacking lip and the upper edge of the bar for bins with a stacking lip.
• Measuring drawers. Designed for baseplates without magnets or screws where the bottom of the bin will sit flush on the surface. If using thicker baseplates then adjust accordingly.
• Measuring objects. Use the right side.  The thin line indicates the usable vertical height for a given bin size, so choose the next size up.

Design and printing notes

• Designed for 0.4mm nozzle and 0.15mm layer height
• Sample printed in PLA on MK4 using quality setting
• Object height measurement based on a 6mm thick base (1mm usable height for a 1U container). Your base may be thinner, so this is