Cage máy quay BMCC / BMPC “Keystone” (Camera Cage) - Tối ưu in 3D

Model
This project is still a work in progress so there are no instructions for detailed assembly yet, if you are keen to try the cage out pick up two 32mm Rosette plates and some 3/8"-16 to ¼"-20 Screw adapters to reinforce the 3d printed threads.

This is a camera cage for the BMCC / BMPC based off of the Keystone for Komodo by Ignite Digi optimised for 3D printing.

Parts needed

• 2x - 32mm Rosette (31.8mm Through link)
• 4x - ¼"-20 5/8" Long Countersunk screws
• 30x - 3/8"-16 to ¼"-20 Screw adapters
• 2x - M6 Threaded Brass Inserts
• Optional - M3 Threaded Brass Inserts

Installation - (Please see photos for guidance)

N/A (Installation manual not yet released)

Print Settings

Supports:

In rosette arches and recesses.

Resolution:

0.12mm

Infill:

30%+

Perimeters:

Ideally 8x plus.

Filament: CF PLA, PC / PCCF, Nylon or any other sturdy filament.

PLEASE NOTE
Because this cage is based so heavily off of the Keystone for Komodo by Ignite Digi you must not print these for commercial sale!