Qidi Q1 Pro Mothreboard Fan 80mm Holder – Giá đỡ quạt 80mm cho mainboard

Originally I wanted to print this model but I didn't want to interfere with the motherboard and also my printer is a later version (V2?) so the 40mm motherboard fan is not attached to the side/bottom of the MB but is screwed on the back panel. I also had an 80mm 24V fan at home. So I made a holder for it also on the back cover. The new fan is plugged into the same port as the original.

The model consists of 3 parts:
- fan holder with cover grid
- internal flange
- a template for the cutout of the back panel and the holes for the screws

Printing:

• Creality Hyper PLA
• nozzle 0.4 - standart QIDI settings for line width
• layer hight 0.2
• wall loops 4
• top/bottom layers 4
• infill 15% 3D Honeycomb
• skirt
• support (holder, flange)

BOM

• GDSTIME 80MM Slim Fan DC 24V 2PIN 80mm x 80mm x 15mm Silent Fan Dual Ball XH2.54
• Brass Heat Inserts M3 -  8x
• Hexagon Hex Socket Head Button Allen Bolt Screw M4x20 - 4x
• Hexagon Hex Socket Head Cap Allen Bolt Screw M3x20 - 8x

Tools:

• drill, hand chip saw, files, fine sandpaper