
Giáo Dục
Clepsydre – Đồng hồ cát nước (Water Hourglass)
- Downloads
- 129
- Likes
- 55
- Views
- 1,733
- Remixes
- 0
- Comments
- 0
Files 6 27.4 MB
- Clepsydre_1776625760.stlSTL · 6.6 MB
- Clepsydre_Project_1776625762.3mf3MF · 1.5 MB
- Infill_Cup_1776625763.stlSTL · 1.7 MB
- Infill_Cup_Project_1776625764.3mf3MF · 490.6 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #314935
- Category
- Giáo Dục
- Published
- License
- Creative Commons — Attribution
Description
A clepsydre is an hourglass that uses water instead of sand.
You will need to add water into the clepsydre before the end of the print.
- First Print an “Infill Cup” file - You will need it to have the exact amount of water (if you add too much water, the clepsydre will not work)
- Then print the Clepsydre
- Add a pause in your slicer at z=114mm (before it starts closing the top)
- Fill the clepsydre with water - Use your Infill Cup (water up to the top line)
- Finish the print
To start the clepsydre :
- Return the clepsydre (water in the top)
- Shake the clepsydre once
Print Settings :
-
Printed on MK3S
-
Filament tested : PLA
-
Nozzle 0.4mm : 0.20mm tested
-
Brim : 5mm
-
Perimeters : 4
-
Solid Layers : Top 6 - Bottom 5
-
Infill : Concentric 20%
Print spec
- Formats
- 3mfgcodestl
- Model files
- 6
- Total size
- 27.4 MB
- Largest file
- 14.8 MB
0 comments
You may also like 12 models
See all-

-

-

-
New -

-

-

-

-

-

-

-


