
Giá treo Power Strip cho bàn Uplift Desk
- Downloads
- 153
- Likes
- 30
- Views
- 1,591
- Remixes
- 0
- Comments
- 0
Files 3 3.2 MB
- uplift-mount-1_1776598122.stlSTL · 131 KB
- uplift-mount-2_1776598123.stlSTL · 131 KB
- uplift-mount_0.2mm_PETG_MK3S_1h29m_1776598123.gcodeGCODE · 2.9 MB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #313616
- Category
- Đồ Gia Dụng
- Published
Description
Use this pair of brackets to mount a power strip or other accessories to the underside of your Uplift desk. It can be mounted to the desk frame crossbar's threaded holes with M8 x 10mm cap screws.
The difference between the -1 and -2 models is the orientation of the slot position. Use one of each to mount a power strip or whatever else might come in handy. Whether it will work for your power strip or other accessory depends on the spacing of the mounting holes of your item. The mounting holes of the brackets are slotted to increase the chance that it will work with a given item.
I used #6 screws to mount a power strip to these brackets. A nut on the opposite side of the bracket helps secure the screw, and then the power strip is just mounted on the heads of the screws.
Suggested print orientation would be on edge with the mounting slot perpendicular to the print bed. This provides the best mechanical properties (strength).
material: PETG
infill: 15% (minimum)
supports: from build plate only
Print spec
- Formats
- gcodestl
- Model files
- 3
- Total size
- 3.2 MB
- Largest file
- 2.9 MB
0 comments
You may also like 12 models
See all-

-
New -

-
New -

-

-
New -
New -

-

-

-


