
Tháp Tuning Pressure Advance có vạch đánh dấu chiều cao
- Downloads
- 183
- Likes
- 3
- Views
- 623
- Remixes
- 0
- Comments
- 0
Files 1 188 KB
- pa_tuning_tower_1776578039.stlSTL · 188 KB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #312665
- Category
- Máy In 3D
- Published
- License
- Creative Commons — Public Domain
- Tags
Description
This is modified from the pa tuning tower from klipper doc , added a height mark for easier use.
(https://www.klipper3d.org/Pressure_Advance.html)
How to use:
Prepare for the test by issuing the following G-Code command:
SET_VELOCITY_LIMIT SQUARE_CORNER_VELOCITY=1 ACCEL=500
This command makes the nozzle travel slower through corners to emphasize the effects of extruder pressure.
Then for printers with a direct drive extruder run the command:
TUNING_TOWER COMMAND=SET_PRESSURE_ADVANCE PARAMETER=ADVANCE START=0 FACTOR=.005
For long bowden extruders use:
TUNING_TOWER COMMAND=SET_PRESSURE_ADVANCE PARAMETER=ADVANCE START=0 FACTOR=.020
Inspect the print and then use the height mark on the model to find the height that has the best quality corners. When in doubt, prefer a lower height.
Print spec
- Formats
- stl
- Model files
- 1
- Total size
- 188 KB
- Largest file
- 188 KB
0 comments
You may also like 12 models
See all-

-

-
New -
New -
New -

-

-
New -

-

-

-

