Kit Card SpaceX Super Heavy

A kit card for SpaceX Super Heavy (1:500 scale)! Elon Musk's SpaceX ship that will take us to Mars!

This kit card is the Super Heavy booster, pair it with my Starship Kit Card for the complete set.

Print as a kit card, or print without the kit card frame if you want to assemble it without breaking the parts off. This is my second kit card, inspired by the style of Nakozen. My goal was to be as accurate as possible while also keeping things as simple as possible. I think it's very fun to make! I hope you enjoy making it as much as I enjoyed developing it!

This model was designed for a 0.2mm layer height, and this is what you should use to print. Other layer heights could affect the way pieces fit together. No supports needed.

Having trouble getting the tolerances just right? Set Outer Walls to print first.

I'd love to see you share your makes below!

Assembly Instructions

1. There are two halves of the hull. Bend each half (to create the vertical cylinder). Bending each fold individually will help you get a nice even shape.
2. Insert the tail end of the hull into the engine piece, one half at a time. The fit is a little tight but it should rock into place.
3. Clip the other “loop” piece on the top of the hull.
4. Insert the fins into the holes at the top. The fit is tight. I was able to wiggle the pieces in, you might need to clean up the holes with a file or knife if the fit is too tight.

Dual Color Printing

This model will look great in a single color (black, silver, or otherwise). But if you want a dual-tone print, like in some of my pictures, just use the “No Frame” file and print the fin pieces in black.