Máy bay Su-47 Berkut one-piece nhiều màu
Remix of Mô hình 3D máy bay chiến đấu SU-47 Berkut sắc nét để in 3D By fady
- Downloads
- 466
- Likes
- 82
- Views
- 1,760
- Remixes
- 0
- Comments
- 0
Files 5 184.2 MB
- SU47_1776565590.3mf3MF · 23.5 MB
- SU47_onepiece_1776565592.stlSTL · 80.4 MB
- SU47_parts_red_1776565595.stlSTL · 111.2 KB
- SU47_parts_white_1776565596.stlSTL · 5.6 MB
Make a variant with AI
Build another version of this model.
Details
- Model ID
- #311991
- Category
- Xe Cộ - Máy Móc
- Published
Description
Introduction:
One piece Sukhoi Su-47 Berkut multicolor supersonic jet fighter. One of the most famous aeroplanes with “backward wings”. I am a fan of the Ace Combat series and this was one of my favourites growing up :)
Credits:
Thanks to the amazing work from @fady modelling this iconic fighter jet! I just made it easier to print and added the colors :)
Printing details:
Layer height: 0.12mm
Material: PETG Prusa Galaxy black, signal white and lipstick red
Supports: Tree, organic, auto, 40 degrees threshold, build plate only
Print time: 27 hours
filament consumption: 281g (the aeroplane is 22 cm long)
Infill: None if printed at >45 degrees nose up in the sky
Orientation: printed at >45 degrees nose up in the sky
All these parameters are already set up in the bambustudio .3mf file :)
Assembly instructions:
None! This is an assembly-free model with the downside of using supports :)
Support removal
I found the supports to be extremely easy to remove at 0.12 mm. They mostly removed themselves when I bent the build plate :)
It was significantly harder at 0.3mm layer height when I did my “quick” initial print test, so you may want to keep the layer height low to get a good finish and easy support removal.
Print spec
- Formats
- 3mfstl
- Model files
- 5
- Total size
- 184.2 MB
- Largest file
- 80.4 MB

